P. (309) 925-7623
PRODUCT
The newest version of our TempRamps features a lightweight material composition and costs 30% less as well. These temporary construction ramps are made of 100% recycled plastic and are 80% lighter than previous versions. TempRamps provide dependable, durable performance through multiple road construction installations.

We have improved the installation time frame as well with fewer anchors necessary to install each TempRamp.
PTR2-48
PTR2-48
Dimensions: 24" X 48", 13.2 pounds
tapers from 1/4" to 1 1/2"

Twelve (12) PTR2-48 Ramp Sections assemble to make a complete TempRamp for a 24-foot road width.

Use for the following Applications:
- Butt Joints
- End of Day Joints
- Speed Bumps/Humps
PTR2-29
PTR2-29
Dimensions: 24" X 29", 6.4 pounds
tapers from 1/4" to 1"

Six (6) PTR2-29 Ramp Sections assemble to make a 12-foot temporary Ramp up to a Steel Plate.

Use for the following Applications:
- Doorway Ramps
- End of Day Joints
- Speed Bumps/Humps
- Steel Plates
TM26
TM26
Inner Diameter: 26", 33 pounds
tapers from 1/4" to 1 1/2"

Four (4) TM26 Ramp Sections assemble to make a complete Manhole Ramp.

Use for the following Applications:
- Manhole
TB37
TB37
Dimensions: 37" X 42", 59 pounds
tapers from 1/4" to 1 1/2"

Eight (8) TB37 Ramp Sections assemble to make a complete TempRamp for a 24-foot road width.

Use for the following Applications:
- Butt Joints
- Doorway Ramps
- End of Day Joints
- Speed Bumps/Humps
- Steel Plates
TB25
TB25
Dimensions: 25" X 42", 40 pounds
tapers from 1/4" to 1 1/2"

Twelve (12) TB25 Ramp Sections assemble to make a complete TempRamp for a 24-foot road width.

Use for the following Applications:
- Butt Joints
- Doorway Ramps
- End of Day Joints
- Speed Bumps/Humps
- Steel Plates
TB14
TB14
Dimensions: 14" X 42", 19 pounds
tapers from 1/4" to 1 1/2"

The TB14 Ramp Section is used to make small adjustments to TempRamp length on an as-needed basis.

Use for the following Applications:
- Butt Joints
- End of Day Joints
SP26
SP26
Dimensions: 37" X 26", 29 pounds
tapers from 1/4" to 1"

Four (4) SP26 Ramp Sections assemble to make a 12-foot Ramp up to a Steel Plate.

Use for the following Applications:
- Doorway Ramps
- Steel Plates
SS4, SS6, SS8
Structural Screws
Recommended Installation:

SS4 - 4x3/8-inch Structural Screw
SS6 - 6x3/8-inch Structural Screw
SS8 - 8x1/4-inch Structural Screw
MSR10, MSR26, MSR28, MSR31
Rings
Recommended Installation:

MSR10 (watervalve ring)inside dim. 10 inches, outside dim. 29 inches, 30 pounds
MSR26 (manhole ring)inside dim. 26 inches, outside dim. 48 inches, 72 pounds
MSR28 (manhole ring)inside dim. 28 inches, outside dim. 48 inches, 65 pounds
MSR31 (manhole ring)inside dim. 31 inches, outside dim. 48 inches, 56 pounds